Package: MsBackendSql
Authors: Johannes Rainer [aut, cre] (https://orcid.org/0000-0002-6977-7147),
Chong Tang [ctb],
Laurent Gatto [ctb] (https://orcid.org/0000-0002-1520-2268)
Compiled: Thu Apr 27 21:30:58 2023
The Spectra Bioconductor package provides a flexible and
expandable infrastructure for Mass Spectrometry (MS) data. The package supports
interchangeable use of different backends that provide additional file support
or different ways to store and represent MS data. The
MsBackendSql package provides backends to store data from whole
MS experiments in SQL databases. The data in such databases can be easily (and
efficiently) accessed using Spectra
objects that use the MsBackendSql
class
as an interface to the data in the database. Such Spectra
objects have a
minimal memory footprint and hence allow analysis of very large data sets even
on computers with limited hardware capabilities. For certain operations, the
performance of this data representation is superior to that of other low-memory
(on-disk) data representations such as Spectra
’s MsBackendMzR
backend.
Finally, the MsBackendSql
supports also remote data access to e.g. a central
database server hosting several large MS data sets.
The package can be installed with the BiocManager
package. To install
BiocManager
use install.packages("BiocManager")
and, after that,
BiocManager::install("MsBackendSql")
to install this package.
MsBackendSql
SQL databasesMsBackendSql
databases can be created either by importing (raw) MS data from
MS data files using the createMsBackendSqlDatabase
or using the
backendInitialize
function by providing in addition to the database connection
also the full MS data to import as a DataFrame
. In the first example we use
the createMsBackendSqlDatabase
function which takes a connection to an (empty)
database and the names of the files from which the data should be imported as
input parameters creates all necessary database tables and stores the full data
into the database. Below we create an empty SQLite database (in a temporary
file) and fill that with MS data from two mzML files (from the r Biocpkg("msdata")
package).
library(RSQLite)
dbfile <- tempfile()
con <- dbConnect(SQLite(), dbfile)
library(MsBackendSql)
fls <- dir(system.file("sciex", package = "msdata"), full.names = TRUE)
createMsBackendSqlDatabase(con, fls)
By default the m/z and intensity values are stored as BLOB data types in the database. This has advantages on the performance to extract peaks data from the database but would for example not allow to filter peaks by m/z values directly in the database. As an alternative it is also possible to the individual m/z and intensity values in separate rows of the database table. This long table format results however in considerably larger databases (with potentially poorer performance). Note also that the code and backend is optimized for MySQL/MariaDB databases by taking advantage of table partitioning and specialized table storage options. Any other SQL database server is however also supported (also portable, self-contained SQLite databases).
The MsBackendSql package provides two backends to interact with such
databases: the (default) MsBackendSql
class and the MsBackendOfflineSql
,
that inherits all properties and functions from the former, but which does not
store the connection to the database within the object but connects (and
disconnects) to (and from) the database in each function call. This allows to
use the latter also for parallel processing setups.
To access the data in the database we create below a Spectra
object providing
the connection to the database in the constructor call and specifying to use the
MsBackendSql
as backend using the source
parameter.
sps <- Spectra(con, source = MsBackendSql())
sps
## MSn data (Spectra) with 1862 spectra in a MsBackendSql backend:
## msLevel precursorMz polarity
## <integer> <numeric> <integer>
## 1 1 NA 1
## 2 1 NA 1
## 3 1 NA 1
## 4 1 NA 1
## 5 1 NA 1
## ... ... ... ...
## 1858 1 NA 1
## 1859 1 NA 1
## 1860 1 NA 1
## 1861 1 NA 1
## 1862 1 NA 1
## ... 34 more variables/columns.
## Use 'spectraVariables' to list all of them.
## Database: F:\biocbuild\bbs-3.17-bioc\tmpdir\Rtmpeyltjz\file2e183658416b
Spectra
objects allow also to change the backend to any other backend
(extending MsBackend
) using the setBackend
function. Below we use this
function to first load all data into memory by changing from the MsBackendSql
to a MsBackendMemory
.
sps_mem <- setBackend(sps, MsBackendMemory())
sps_mem
## MSn data (Spectra) with 1862 spectra in a MsBackendMemory backend:
## msLevel rtime scanIndex
## <integer> <numeric> <integer>
## 1 1 0.280 1
## 2 1 0.559 2
## 3 1 0.838 3
## 4 1 1.117 4
## 5 1 1.396 5
## ... ... ... ...
## 1858 1 258.636 927
## 1859 1 258.915 928
## 1860 1 259.194 929
## 1861 1 259.473 930
## 1862 1 259.752 931
## ... 34 more variables/columns.
## Processing:
## Switch backend from MsBackendSql to MsBackendMemory [Thu Apr 27 21:31:18 2023]
With this function it is also possible to change from any backend to a
MsBackendSql
in which case a new database is created and all data from the
originating backend is stored in this database. We thus have to provide in
addition also a connection to an (empty) database using the dbcon
parameter. Below we create a new empty SQLite database and store all data
from the Spectra
object into this database using the setBackend
method.
tmpcon <- dbConnect(SQLite(), tempfile())
sps2 <- setBackend(sps_mem, MsBackendSql(), dbcon = tmpcon)
## Warning in .create_from_spectra_data(dbcon, data = data, ...): Replacing
## original column "spectrum_id_"
sps2
## MSn data (Spectra) with 1862 spectra in a MsBackendSql backend:
## msLevel precursorMz polarity
## <integer> <numeric> <integer>
## 1 1 NA 1
## 2 1 NA 1
## 3 1 NA 1
## 4 1 NA 1
## 5 1 NA 1
## ... ... ... ...
## 1858 1 NA 1
## 1859 1 NA 1
## 1860 1 NA 1
## 1861 1 NA 1
## 1862 1 NA 1
## ... 34 more variables/columns.
## Use 'spectraVariables' to list all of them.
## Database: F:\biocbuild\bbs-3.17-bioc\tmpdir\Rtmpeyltjz\file2e181a0b3843
## Processing:
## Switch backend from MsBackendSql to MsBackendMemory [Thu Apr 27 21:31:18 2023]
## Switch backend from MsBackendMemory to MsBackendSql [Thu Apr 27 21:31:19 2023]
Similar to any other Spectra
object we can retrieve the available spectra
variables using the spectraVariables
function.
spectraVariables(sps)
## [1] "msLevel" "rtime"
## [3] "acquisitionNum" "scanIndex"
## [5] "dataStorage" "dataOrigin"
## [7] "centroided" "smoothed"
## [9] "polarity" "precScanNum"
## [11] "precursorMz" "precursorIntensity"
## [13] "precursorCharge" "collisionEnergy"
## [15] "isolationWindowLowerMz" "isolationWindowTargetMz"
## [17] "isolationWindowUpperMz" "peaksCount"
## [19] "totIonCurrent" "basePeakMZ"
## [21] "basePeakIntensity" "ionisationEnergy"
## [23] "lowMZ" "highMZ"
## [25] "mergedScan" "mergedResultScanNum"
## [27] "mergedResultStartScanNum" "mergedResultEndScanNum"
## [29] "injectionTime" "filterString"
## [31] "spectrumId" "ionMobilityDriftTime"
## [33] "scanWindowLowerLimit" "scanWindowUpperLimit"
## [35] "spectrum_id_"
The MS peak data can be accessed using either the mz
, intensity
or
peaksData
functions. Below we extract the peaks matrix of the 5th spectrum and
display the first 6 rows.
peaksData(sps)[[5]] |>
head()
## mz intensity
## [1,] 105.0347 0
## [2,] 105.0362 164
## [3,] 105.0376 0
## [4,] 105.0391 0
## [5,] 105.0405 328
## [6,] 105.0420 0
All data (peaks data or spectra variables) are always retrieved on the fly
from the database resulting thus in a minimal memory footprint for the Spectra
object.
print(object.size(sps), units = "KB")
## 91.4 Kb
The backend supports also adding additional spectra variables or changing their values. Below we add 10 seconds to the retention time of each spectrum.
sps$rtime <- sps$rtime + 10
Such operations do however not change the data in the database (which is always considered read-only) but are cached locally within the backend object (in memory). The size in memory of the object is thus higher after changing that spectra variable.
print(object.size(sps), units = "KB")
## 106 Kb
Such $<-
operations can also be used to cache spectra variables
(temporarily) in memory which can eventually improve performance. Below we test
the time it takes to extract the MS level from each spectrum from the database,
then cache the MS levels in memory using $msLevel <-
and test the timing to
extract these cached variable.
system.time(msLevel(sps))
## user system elapsed
## 0.00 0.02 0.02
sps$msLevel <- msLevel(sps)
system.time(msLevel(sps))
## user system elapsed
## 0 0 0
We can also use the reset
function to reset the data to its original state
(this will cause any local spectra variables to be deleted and the backend to be
initialized with the original data in the database).
sps <- reset(sps)
To use the MsBackendOfflineSql
backend we need to provide all information
required to connect to the database along with the database driver to the
Spectra
function. Which parameters are required to connect to the database
depends on the SQL database and the used driver. In our example the data is
stored in a SQLite database, hence we use the SQLite()
database driver and
only need to provide the database name with the dbname
parameter. For a
MySQL/MariaDB database we would use the MariaDB()
driver and would have to
provide the database name, user name, password as well as the host name and port
through which the database is accessible.
sps_off <- Spectra(SQLite(), dbname = dbfile,
source = MsBackendOfflineSql())
sps_off
## MSn data (Spectra) with 1862 spectra in a MsBackendOfflineSql backend:
## msLevel precursorMz polarity
## <integer> <numeric> <integer>
## 1 1 NA 1
## 2 1 NA 1
## 3 1 NA 1
## 4 1 NA 1
## 5 1 NA 1
## ... ... ... ...
## 1858 1 NA 1
## 1859 1 NA 1
## 1860 1 NA 1
## 1861 1 NA 1
## 1862 1 NA 1
## ... 34 more variables/columns.
## Use 'spectraVariables' to list all of them.
## Database: F:\biocbuild\bbs-3.17-bioc\tmpdir\Rtmpeyltjz\file2e183658416b
This backend provides the exact same functionality than MsBackendSql
with the
difference that the connection to the database is opened and closed for each
function call. While this leads to a slightly lower performance, it allows to
use the backend (and hence the Spectra
object) also in a parallel processing
setup. In contrast, for the MsBackendSql
parallel processing is disabled since
it is not possible to share the active backend connection within the object
across different parallel processes.
Below we compare the performance of the two backends. The performance difference is the result from opening and closing the database connection for each call. Note that this will also depend on the SQL server that is being used. For SQLite databases there is almost no overhead.
library(microbenchmark)
microbenchmark(msLevel(sps), msLevel(sps_off))
## Unit: milliseconds
## expr min lq mean median uq max neval
## msLevel(sps) 9.4370 9.83715 10.96199 10.10365 11.09820 20.1551 100
## msLevel(sps_off) 12.5031 13.02855 15.35999 13.36390 14.77925 116.4527 100
## cld
## a
## b
The need to retrieve any spectra data on-the-fly from the database will have an
impact on the performance of data access function of Spectra
objects using the
MsBackendSql
backends. To evaluate its impact we next compare the performance
of the MsBackendSql
to other Spectra
backends, specifically, the
MsBackendMzR
which is the default backend to read and represent raw MS data,
and the MsBackendMemory
backend that keeps all MS data in memory (and is thus
not suggested for larger MS experiments). Similar to the MsBackendMzR
, also
the MsBackendSql
keeps only a limited amount of data in memory. These
on-disk backends need thus to retrieve spectra and MS peaks data on-the-fly
from either the original raw data files (in the case of the MsBackendMzR
) or
from the SQL database (in the case of the MsBackendSql
). The in-memory backend
MsBackendMemory
is supposed to provide the fastest data access since all data
is kept in memory.
Below we thus create Spectra
objects from the same data but using the
different backends.
sps <- Spectra(con, source = MsBackendSql())
sps_mzr <- Spectra(fls, source = MsBackendMzR())
sps_im <- setBackend(sps_mzr, backend = MsBackendMemory())
At first we compare the memory footprint of the 3 backends.
print(object.size(sps), units = "KB")
## 91.4 Kb
print(object.size(sps_mzr), units = "KB")
## 386.2 Kb
print(object.size(sps_im), units = "KB")
## 54494.3 Kb
The MsBackendSql
has the lowest memory footprint of all 3 backends because it
does not keep any data in memory. The MsBackendMzR
keeps all spectra
variables, except the MS peaks data, in memory and has thus a larger size. The
MsBackendMemory
keeps all data (including the MS peaks data) in memory and has
thus the largest size in memory.
Next we compare the performance to extract the MS level for each spectrum from
the 4 different Spectra
objects.
library(microbenchmark)
microbenchmark(msLevel(sps),
msLevel(sps_mzr),
msLevel(sps_im))
## Unit: microseconds
## expr min lq mean median uq max neval cld
## msLevel(sps) 9947.1 10821.90 11473.804 11062.30 11380.95 24541.1 100 a
## msLevel(sps_mzr) 633.8 790.15 854.852 822.50 900.45 1343.4 100 b
## msLevel(sps_im) 14.6 22.20 49.070 50.55 62.35 121.7 100 c
Extracting MS levels is thus slowest for the MsBackendSql
, which is not
surprising because both other backends keep this data in memory while the
MsBackendSql
needs to retrieve it from the database.
We next compare the performance to access the full peaks data from each
Spectra
object.
microbenchmark(peaksData(sps, BPPARAM = SerialParam()),
peaksData(sps_mzr, BPPARAM = SerialParam()),
peaksData(sps_im, BPPARAM = SerialParam()), times = 10)
## Unit: milliseconds
## expr min lq mean
## peaksData(sps, BPPARAM = SerialParam()) 231.9751 251.6248 478.17764
## peaksData(sps_mzr, BPPARAM = SerialParam()) 668.6102 688.9038 799.45817
## peaksData(sps_im, BPPARAM = SerialParam()) 3.3050 3.3737 5.28842
## median uq max neval cld
## 440.07165 638.9451 1009.4576 10 a
## 710.69195 815.6149 1163.6533 10 b
## 3.45615 4.1512 18.5467 10 c
As expected, the MsBackendMemory
has the fasted access to the full peaks
data. The MsBackendSql
outperforms however the MsBackendMzR
providing faster
access to the m/z and intensity values.
Performance can be improved for the MsBackendMzR
using parallel
processing. Note that the MsBackendSql
does not support parallel
processing and thus parallel processing is (silently) disabled in functions such
as peaksData
.
m2 <- MulticoreParam(2)
## Warning in MulticoreParam(2): MulticoreParam() not supported on Windows, use
## SnowParam()
microbenchmark(peaksData(sps, BPPARAM = m2),
peaksData(sps_mzr, BPPARAM = m2),
peaksData(sps_im, BPPARAM = m2), times = 10)
## Unit: milliseconds
## expr min lq mean median
## peaksData(sps, BPPARAM = m2) 180.3531 217.2287 415.87656 412.41505
## peaksData(sps_mzr, BPPARAM = m2) 675.4422 694.4523 713.02217 707.52175
## peaksData(sps_im, BPPARAM = m2) 1.0893 1.4899 1.46501 1.55425
## uq max neval cld
## 623.5375 648.3423 10 a
## 727.3405 782.7734 10 b
## 1.5782 1.6178 10 c
We next compare the performance of subsetting operations.
microbenchmark(filterRt(sps, rt = c(50, 100)),
filterRt(sps_mzr, rt = c(50, 100)),
filterRt(sps_im, rt = c(50, 100)))
## Unit: microseconds
## expr min lq mean median uq
## filterRt(sps, rt = c(50, 100)) 3833.1 4086.25 4334.958 4264.05 4430.90
## filterRt(sps_mzr, rt = c(50, 100)) 3139.5 3300.95 3665.992 3503.85 3728.35
## filterRt(sps_im, rt = c(50, 100)) 621.6 689.60 768.178 763.05 792.40
## max neval cld
## 8404.9 100 a
## 12667.7 100 b
## 2353.8 100 c
The two on-disk backends MsBackendSql
and MsBackendMzR
show a comparable
performance for this operation. This filtering does involves access to a spectra
variables (the retention time in this case) which, for the MsBackendSql
needs
first to be retrieved from the backend. The MsBackendSql
backend allows
however also to cache spectra variables (i.e. they are stored within the
MsBackendSql
object). Any access to such cached spectra variables can
eventually be faster because no dedicated SQL query is needed.
To evaluate the performance of a pure subsetting operation we first define the
indices of 10 random spectra and subset the Spectra
objects to these.
idx <- sample(seq_along(sps), 10)
microbenchmark(sps[idx],
sps_mzr[idx],
sps_im[idx])
## Unit: microseconds
## expr min lq mean median uq max neval cld
## sps[idx] 167.8 195.75 269.569 245.75 263.2 3191.1 100 a
## sps_mzr[idx] 912.8 939.00 1014.005 963.00 1040.5 2095.8 100 b
## sps_im[idx] 241.3 272.40 359.296 302.00 341.3 2938.4 100 c
Here the MsBackendSql
outperforms the other backends because it does not keep
any data in memory and hence does not need to subset these. The two other
backends need to subset the data they keep in memory which is in both cases a
data frame with either a reduced set of spectra variables or the full MS data.
At last we compare also the extraction of the peaks data from the such subset
Spectra
objects.
sps_10 <- sps[idx]
sps_mzr_10 <- sps_mzr[idx]
sps_im_10 <- sps_im[idx]
microbenchmark(peaksData(sps_10),
peaksData(sps_mzr_10),
peaksData(sps_im_10),
times = 10)
## Unit: microseconds
## expr min lq mean median uq
## peaksData(sps_10) 4026.5 4350.8 5405.38 5464.85 6441.4
## peaksData(sps_mzr_10) 5965129.3 6160867.5 6612519.86 6628541.40 7067831.1
## peaksData(sps_im_10) 537.7 579.5 771.30 759.25 896.7
## max neval cld
## 7415.0 10 a
## 7227800.7 10 b
## 1068.5 10 a
The MsBackendSql
outperforms the MsBackendMzR
while, not unexpectedly, the
MsBackendMemory
provides fasted access.
MsBackendSql
The MsBackendSql
backend does not support parallel processing since the
database connection can not be shared across the different (parallel)
processes. Thus, all methods on Spectra
objects that use a MsBackendSql
will
automatically (and silently) disable parallel processing even if a dedicated
parallel processing setup was passed along with the BPPARAM
method.
Some functions on Spectra
objects require to load the MS peak data (i.e., m/z
and intensity values) into memory. For very large data sets (or computers with
limited hardware resources) such function calls can cause out-of-memory
errors. One example is the lengths
function that determines the number of
peaks per spectrum by loading the peak matrix first into memory. Such functions
should ideally be called using the peaksapply
function with parameter
chunkSize
(e.g., peaksapply(sps, lengths, chunkSize = 5000L)
). Instead of
processing the full data set, the data will be first split into chunks of size
chunkSize
that are stepwise processed. Hence, only data from chunkSize
spectra is loaded into memory in one iteration.
The MsBackendSql
provides an MS data representations and storage mode with a
minimal memory footprint (in R) that is still comparably efficient for standard
processing and subsetting operations. This backend is specifically useful for
very large MS data sets, that could even be hosted on remote (MySQL/MariaDB)
servers. A potential use case for this backend could thus be to set up a central
storage place for MS experiments with data analysts connecting remotely to this
server to perform initial data exploration and filtering. After subsetting to a
smaller data set of interest, users could then retrieve/download this data by
changing the backend to e.g. a MsBackendMemory
, which would result in a
download of the full data to the user computer’s memory.
sessionInfo()
## R version 4.3.0 RC (2023-04-13 r84269 ucrt)
## Platform: x86_64-w64-mingw32/x64 (64-bit)
## Running under: Windows Server 2022 x64 (build 20348)
##
## Matrix products: default
##
##
## locale:
## [1] LC_COLLATE=C
## [2] LC_CTYPE=English_United States.utf8
## [3] LC_MONETARY=English_United States.utf8
## [4] LC_NUMERIC=C
## [5] LC_TIME=English_United States.utf8
##
## time zone: America/New_York
## tzcode source: internal
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] microbenchmark_1.4.9 RSQLite_2.3.1 MsBackendSql_1.0.1
## [4] Spectra_1.10.0 ProtGenerics_1.32.0 BiocParallel_1.34.0
## [7] S4Vectors_0.38.0 BiocGenerics_0.46.0 BiocStyle_2.28.0
##
## loaded via a namespace (and not attached):
## [1] sandwich_3.0-2 sass_0.4.5 MsCoreUtils_1.12.0
## [4] lattice_0.21-8 hms_1.1.3 digest_0.6.31
## [7] grid_4.3.0 evaluate_0.20 bookdown_0.33
## [10] mvtnorm_1.1-3 fastmap_1.1.1 blob_1.2.4
## [13] Matrix_1.5-4 jsonlite_1.8.4 progress_1.2.2
## [16] mzR_2.34.0 DBI_1.1.3 survival_3.5-5
## [19] multcomp_1.4-23 BiocManager_1.30.20 TH.data_1.1-2
## [22] codetools_0.2-19 jquerylib_0.1.4 cli_3.6.1
## [25] rlang_1.1.0 crayon_1.5.2 Biobase_2.60.0
## [28] splines_4.3.0 bit64_4.0.5 cachem_1.0.7
## [31] yaml_2.3.7 tools_4.3.0 parallel_4.3.0
## [34] memoise_2.0.1 ncdf4_1.21 vctrs_0.6.2
## [37] R6_2.5.1 zoo_1.8-12 lifecycle_1.0.3
## [40] fs_1.6.2 IRanges_2.34.0 bit_4.0.5
## [43] clue_0.3-64 MASS_7.3-59 cluster_2.1.4
## [46] pkgconfig_2.0.3 bslib_0.4.2 data.table_1.14.8
## [49] Rcpp_1.0.10 xfun_0.39 knitr_1.42
## [52] htmltools_0.5.5 snow_0.4-4 rmarkdown_2.21
## [55] compiler_4.3.0 prettyunits_1.1.1